We are replacing the worn bearings we found in the steering column for the Malibu today.
Our Blog
1975 Ford Bronco
New job in the shop! Â 1975 Ford Bronco for mechanical restoration! We have started on repairing the doors for the Bronco today. Stripping the bed down so we can apply bed liner. The rear driveshaft has been removed and the u-joints are getting replaced. Del is working...
1972 Chevy Blazer
Last of the new jobs in the shop! The blazer is getting disassembled today. We are removing the old passenger door to install the new door. Â We will need to remove the window frame from the new door to get it to fit. We are repairing the rust and body damage to the...
1967 Chevy Corvette
Another new job in the shop for restoration! We have started on the disassembly for the '67 Vette restoration. We are almost done with all the sanding down and body prep work for this Corvette. Disassembly and body repair continue to move forward. The Corvette is out...
1965 Pontiac Lemans
New job just came into the shop today. Â This client is looking for a restoration of his 1965 Lemans. Â Now the vehicle has not been driven for many years so there will probably be a good deal of mechanical to go through, but the body of the vehicle looks to be in great...
1931 Ford Roadster
One more new job just came in. Â Interior and paint restoration on a 1931 Ford Roadster. The body has been removed from the frame for the Roadster and we are working on grinding off all the old paint from the body. Â There was quite a bit of body filler under the paint...
1979 Chevy HopCap
We are working out a few small items on this RV today. Â The first step we are taking is to replace a coolant temp sender that was bad and causing a fuel level issue in the engine.
1937 Chevy Stakebed
The transmission is out of the Chevy Truck and ready to send out for rebuilding.
2007 Volkswagen GTI
We are buffing the paint for the stripe on the hood today and will also install the new grille.
Looking Glass Corvette Club Cruise
Below are the pictures from the Looking Glass Corvette Cruise at Precision Restorations on May 1st 2010. Â We all had a great time and there were over 70 Corvettes here! [cincopa 10594416]
2005 Volkswagen GTI
This GTI had an unfortunate run in with a parking meter. Â Wear are replacing the front bumper, grill, intercooler, radiator and a/c condenser. Â We are also installing some new wheels.
1967 Pontiac Firebird
The new motor mount bolts and fuel line are in the Firebird.
1967 Chevy Impala SS
New job in the shop! Â Client sent us his 67 Impala SS for a little bits and pieces touch ups. The techs are working on disassembling the engine to get it and the engine bay painted. Dave has pulled a few brackets and the valve covers off the engine on the Impala. Â He...
1937 Ford Tudor
New job in the shop. Â Our client brought us this beautiful 1937 Ford Tudor for a mechanical restoration. We are removing the fuel tank and radiator for rebuilding. Â Next we will get the generator off and send it out for rebuild. We are back at work today on the '37...
1973 Pontiac LeMans
New Job in the shop! Â This LeMans is in here to get mechanically up and running and back safe on the street.
1956 Packard
Alex is repairing the dent in the hood of the packard that was caused by the battery exploding. The Packard hood is repaired and the hood and fender are sanded and ready to move into paint. The Packard got masked off and painted today. We are getting the engine power...
Taigate Trailer
Larry and Ralph are building the inner structure that all of the electronic will be attached to.
1959 Cadillac Fleetwood
We got a new job in the shop! Â This time it is a 1959 Cadillac Fleetwood in for collision repair. The cadillac is up on our frame rack for some disassembly and body alignment. We continue to move forward into disassembling and repairing the 1959 Cadillac. While the...